Google translate

Материалы

CNCA -3KT. Programming manual.(Chapter 3)

Example:

PM: <.> 10:15FA 200:15FA;

<.> Whole needle bed with ground colour

10: Return to the 10th needle

15FA Copy 15 times field A

200: Jump to the 200th needle

15FA Copy 15 times field A

The machine knits ground colour on all needles except:

From the 10th needle FA is knitted 15 times and from the 200th needle FA is knitted 15 times

PA: Non-selected needles include automatically '.' = ground colour

PM: Non-selected needles are not selected.

Horizontal mirroring

Until now we have made field instructions for example thus: FA=1-10„ Field instructions can also be used for mirroring. The part of the graph, which is to be mirrored is so instructed: FA=10-1. The panel then runs in the graph "BACKWARDS" from column 10 to column 1.

Field instructions can also be used in "PA". Thus, already available pattern information of a section of the graph can be transferred to another area of the graph and also mirrored, if required.

Example:

100 JA1=1418(1400-1418)

105 FA=1-10

106 FB=10—1

107 FC=l-20

110 PA:JA1 FB;

115 PM: <FC>;

1400 A.........

1402 AA........

1404 AAA.......

1406 AAAA......

1408 AAAAA.....

1410 AAAAAA....

1412 AAAAAAA...

1414 AAAAAAAA..

1416 AAAAAAAAA.

1418 AAAAAAAAAA

 

Добавить комментарий


Защитный код
Обновить